SUB Göttingen

May 19, 20, 27, 2020; June 3 - 4, 2020

Time: depends on the lesson, see the schedule below

Instructors: Daniel Bangert, Claudia Engelhardt, Timo Gnadt, Péter Kiraly, Hanna Varachkina, Andreas Walker, Ubbo Veentjer, Najko Jahn, Anne Hobert

Helpers: Astrid Orth, Birgit Schmidt

General Information

Library Carpentry is made by people working in library- and information-related roles to help you:

Library Carpentry introduces you to the fundamentals of computing and provides you with a platform for further self-directed learning. For more information on what we teach and why, please see our paper "Library Carpentry: software skills training for library professionals".

Who: The course is for people working in library- and information-related roles. You don't need to have any previous knowledge of the tools that will be presented at the workshop.

Where: Big Blue Button. BBB

When: May 19, 20, 27, 2020; June 3 - 4, 2020. Add to your Google Calendar.

Requirements: Participants must bring a laptop with a Mac, Linux, or Windows operating system (not a tablet, Chromebook, etc.) that they have administrative privileges on. They should have a few specific software packages installed (listed below).

Code of Conduct: Everyone who participates in Carpentries activities is required to conform to the Code of Conduct. This document also outlines how to report an incident if needed.

Contact: Please email to-be-announced for more information.

Surveys

Please be sure to complete these surveys before and after the workshop.

Pre-workshop Survey

Post-workshop Survey

Schedule

Tue 19 May

10:00 Welcome & Round of Introductions / Motivation, Introduction to Library Carpentry
10:20 Introduction to Working with Data (Regular Expressions)
13:30 End

Wed 20 May

09:30 Tech helpdesk (if needed)
10:00 Welcome & Round of Introductions / Motivation, Introduction to Library Carpentry
10:20 Git
12:30 End

Wed 27 May

09:30 Tech helpdesk (if needed)
10:00 Welcome & Round of Introductions / Motivation, Introduction to Library Carpentry
10:20 OpenRefine (includes a break)
14:00 End

Wed 03 June

13:30 Tech helpdesk (if needed)
14:00 Welcome & Round of Introductions / Motivation, Introduction to Library Carpentry
14:20 Intro to UNIX Shell (Part 1)
16:20 End

Thu 04 June

14:00 Intro to UNIX Shell (Part 2)
16:10 End

We will use this collaborative document for chatting, taking notes, and sharing URLs and bits of code.

Syllabus

Introduction to Working with Data (Regular Expressions)

OpenRefine

Git

Intro to Unix Shell

Setup

To participate in a Library Carpentry workshop, you will need access to the software described below. In addition, you will need an up-to-date web browser.

We maintain a list of common issues that occur during installation as a reference for instructors that may be useful on the Configuration Problems and Solutions wiki page.

The Bash Shell

Bash is a commonly-used shell that gives you the power to do simple tasks more quickly.

Video Tutorial
  1. Download the Git for Windows installer.
  2. Run the installer and follow the steps below:
    1. Click on "Next" four times (two times if you've previously installed Git). You don't need to change anything in the Information, location, components, and start menu screens.
    2. Select "Use the nano editor by default" and click on "Next".
    3. Keep "Git from the command line and also from 3rd-party software" selected and click on "Next". If you forgot to do this programs that you need for the workshop will not work properly. If this happens rerun the installer and select the appropriate option.
    4. Click on "Next".
    5. Select "Use the native Windows Secure Channel library", and click "Next".
    6. Keep "Checkout Windows-style, commit Unix-style line endings" selected and click on "Next".
    7. Select "Use Windows' default console window" and click on "Next".
    8. Leave all three items selected, and click on "Next".
    9. Do not select the experimental option. Click "Install".
    10. Click on "Finish".
  3. If your "HOME" environment variable is not set (or you don't know what this is):
    1. Open command prompt (Open Start Menu then type cmd and press [Enter])
    2. Type the following line into the command prompt window exactly as shown:

      setx HOME "%USERPROFILE%"

    3. Press [Enter], you should see SUCCESS: Specified value was saved.
    4. Quit command prompt by typing exit then pressing [Enter]

This will provide you with both Git and Bash in the Git Bash program.

The default shell in all versions of macOS is Bash, so no need to install anything. You access Bash from the Terminal (found in /Applications/Utilities). See the Git installation video tutorial for an example on how to open the Terminal. You may want to keep Terminal in your dock for this workshop.

The default shell is usually Bash, but if your machine is set up differently you can run it by opening a terminal and typing bash. There is no need to install anything.

Git

Git is a version control system that lets you track who made changes to what when and has options for easily updating a shared or public version of your code on github.com. You will need a supported web browser.

You will need an account at github.com for parts of the Git lesson. Basic GitHub accounts are free. We encourage you to create a GitHub account if you don't have one already. Please consider what personal information you'd like to reveal. For example, you may want to review these instructions for keeping your email address private provided at GitHub.

Git should be installed on your computer as part of your Bash install (described above).

Video Tutorial

For OS X 10.9 and higher, install Git for Mac by downloading and running the most recent "mavericks" installer from this list. Because this installer is not signed by the developer, you may have to right click (control click) on the .pkg file, click Open, and click Open on the pop up window. After installing Git, there will not be anything in your /Applications folder, as Git is a command line program. For older versions of OS X (10.5-10.8) use the most recent available installer labelled "snow-leopard" available here.

If Git is not already available on your machine you can try to install it via your distro's package manager. For Debian/Ubuntu run sudo apt-get install git and for Fedora run sudo dnf install git.

OpenRefine

For this lesson you will need OpenRefine and a web browser. Note: this is a Java program that runs on your machine (not in the cloud). It runs inside a web browser, but no web connection is needed.

Check that you have either the Firefox or the Chrome browser installed and set as your default browser. OpenRefine runs in your default browser. It will not run correctly in Internet Explorer.

Download software from http://openrefine.org/

Create a new directory called OpenRefine.

Unzip the downloaded file into the OpenRefine directory by right-clicking and selecting "Extract ...".

Go to your newly created OpenRefine directory.

Launch OpenRefine by clicking openrefine.exe (this will launch a command prompt window, but you can ignore that - just wait for OpenRefine to open in the browser).

If you are using a different browser, or if OpenRefine does not automatically open for you, point your browser at http://127.0.0.1:3333/ or http://localhost:3333 to use the program.

Check that you have either the Firefox or the Chrome browser installed and set as your default browser. OpenRefine runs in your default browser. It may not run correctly in Safari.

Download software from http://openrefine.org/.

Create a new directory called OpenRefine.

Unzip the downloaded file into the OpenRefine directory by double-clicking it.

Go to your newly created OpenRefine directory.

Launch OpenRefine by dragging the icon into the Applications folder.

Use Ctrl-click/Open ... to launch it.

If you are using a different browser, or if OpenRefine does not automatically open for you, point your browser at http://127.0.0.1:3333/ or http://localhost:3333 to use the program.

Check that you have either the Firefox or the Chrome browser installed and set as your default browser. OpenRefine runs in your default browser.

Download software from http://openrefine.org/.

Make a directory called OpenRefine.

Unzip the downloaded file into the OpenRefine directory.

Go to your newly created OpenRefine directory.

Launch OpenRefine by entering ./refine into the terminal within the OpenRefine directory.

If you are using a different browser, or if OpenRefine does not automatically open for you, point your browser at http://127.0.0.1:3333/ or http://localhost:3333 to use the program.